SUITABLE FOR USE IN HOMES | DOCTORS’ SURGERIES | CARE HOMES | SCHOOLS | OFFICE BUILDINGS | ANY ENVIRONMENT REQUIRING MICROBIAL CONTROL. FAST ACTING – KILLS BACTERIA AND VIRUSES WITHIN SECONDS
Allowing it to dwell, especially on fabrics & fibres ensures solution is absorbed and fully effective (do not over wet.)
The antimicrobial effects of Envirosafe can last weeks, however in high use areas where the surfaces are rubbed against and contamination is re-introduced, we advise a more realistic period of 24 hours.
Standard Envirosafe is not food safe – our NEW Envirosafe SF is! Ready to use, fragrance free and safe for use in food prep areas, however (some real world advice) European regulations are extremely strict on the levels of disinfectant residue that can come into contact with food, which can easily be exceeded if too much product is applied or re-applied without rinsing in between applications – therefore we advise that surfaces which will come into direct contact with food are wiped with wet, disposable paper towels prior to food being prepared. (Interestingly, in the USA a level of 200ppm is safe according to their regulations, but even though we are Brexiting, the UK will still be following European regulations for the foreseeable future!)
INSTRUCTIONS FOR USE:
Ready to use:
Hard Surface Cleaning & Sanitising: Clean surface and ensure free from dirt & debris. Spray onto surface and allow to dry. Can be wiped over with a disposable cloth/paper towel. Suitable for all wet-cleanable surfaces. May be misted over for added protection. After application of Envirosafe SF where food is to be prepared, wipe surface with a wet paper towel before direct food contact.
Fogging: Mix as directed above and follow machine instructions. Can be applied with an 01 jet using your existing spraying equipment. Check moisture has formed on surfaces to ensure adequate coverage. Use QAC Test Strips to check adequate application.
Use with our QAC Test Strips for effective measuring of product application: ensure test strip tip has absorbed applied product and take reading immediately – 200ppm+ is an effective level of sanitiser.
Not suitable for use in Hydro-Force inline sprayers or equipment that heats the product.